| MRC |
Requirement Statement |
Characteristics |
| CRTP |
TOLERANCE RANGE PER SECTION |
-10.00 TO 10.00 PERCENT ALL SECTIONS |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
2 UNTHREADED MOUNTING HOLES |
| CWPM |
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT |
0.600 |
| CQJJ |
NONDERATED OPERATING TEMP |
-55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM |
| AEBY |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH |
5.250 INCHES NOMINAL |
| CWPK |
INSULATION RESISTANCE AT REFERENCE TEMP |
8000.0 MEGOHM-MICROFARADS |
| CQBQ |
CAPACITANCE VALUE PER SECTION |
0.040 MICROFARADS ALL SECTIONS |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CQBF |
III INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP |
350.0 MEGOHM-MICROFARADS |
| BWGP |
SECTION QUANTITY |
2 |
| ADAQ |
BODY LENGTH |
6.000 INCHES NOMINAL |
| AEBP |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH |
5.500 INCHES NOMINAL |
| ABKW |
(NON-CORE DATA) OVERALL HEIGHT |
1.800 INCHES MAXIMUM |
| ADAT |
BODY WIDTH |
2.120 INCHES NOMINAL |
| CWJK |
CASE MATERIAL |
PLASTIC |
| AAQL |
BODY STYLE |
W/MTG HOLE(S)/SLOT(S) TERMINAL(S) ON ONE SURFACE |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 STANDOFF, SOLDER LUG |
| ABHP |
(NON-CORE DATA) OVERALL LENGTH |
6.000 INCHES NOMINAL |
| AEBU |
TERMINAL HEIGHT FROM BODY |
0.300 INCHES MAXIMUM |
| CQWM |
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION |
10000.0 DC ALL SECTIONS |
| CRDN |
TEMP COEFFICIENT OF CAPACITANCE RANGE PER SECTION IN PPM PER DEG CELSIUS |
-3.0 TO 5.0 ALL SECTIONS |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.187 INCHES MINIMUM |
| ADAU |
BODY HEIGHT |
1.500 INCHES NOMINAL |
| CWSG |
III TERMINAL SURFACE TREATMENT |
SOLDER |
| ABMK |
(NON-CORE DATA) OVERALL WIDTH |
2.120 INCHES NOMINAL |
| AEBZ |
SCHEMATIC DIAGRAM DESIGNATOR |
SERIES CONNECTED |
