| MRC |
Requirement Statement |
Characteristics |
| AAZP |
(NON-CORE DATA) CHAMFER LENGTH |
0.0420 INCHES MINIMUM AND 0.0610 INCHES MAXIMUM |
| MATT |
MATERIAL |
COPPER ALLOY OVERALL |
| CSYT |
(NON-CORE DATA) CHAMFER ANGLE |
15.0 DEGREES NOMINAL |
| CTTG |
RIGHT END BODY DIAMETER |
1.3765 INCHES MINIMUM AND 1.3770 INCHES MAXIMUM |
| ABGC |
SLOT WIDTH |
0.0230 INCHES MINIMUM AND 0.0350 INCHES MAXIMUM FIRST |
| CTSN |
LEFT END BODY DIAMETER |
1.3765 INCHES MINIMUM AND 1.3770 INCHES MAXIMUM |
| ADAS |
BODY INSIDE DIAMETER |
1.1255 INCHES MINIMUM AND 1.1260 INCHES MAXIMUM |
| SR-5 |
DESIGN CONTROL REFERENCE |
6864799 |
| ABGD |
SLOT LENGTH |
0.1840 INCHES MINIMUM AND 0.1970 INCHES MAXIMUM FIRST |
| AEPR |
FLANGE OUTSIDE DIAMETER |
1.5400 INCHES MINIMUM AND 1.5530 INCHES MAXIMUM |
| ADAR |
BODY OUTSIDE DIAMETER |
1.3765 INCHES MINIMUM AND 1.3770 INCHES MAXIMUM |
| ABHP |
OVERALL LENGTH |
0.9130 INCHES MINIMUM AND 0.9350 INCHES MAXIMUM |
| SR-5 |
THE MANUFACTURERS DATA |
|
| CTJM |
ANTIROTATION/LUBRICATION TYPE AND QUANTITY |
4 SLOT |
| STYL |
STYLE DESIGNATOR |
SOLID |
| CQFM |
HARDNESS RATING |
149.0 BRINELL HULTGREN MINIMUM AND 255.0 BRINELL HULTGREN MAXIMUM OVERALL |
| BZLX |
CORNER SHAPE |
SQUARE OUTSIDE LEFT CORNER CHAMFERED OUTSIDE RIGHT CORNER SQUARE INSIDE RIGHT CORNER ROUND INSIDE LEFT CORNER ROUND CENTER FLANGE LEFT BODY CORNER ROUND CENTER FLANGE RIGHT BODY CORNER SQUARE CENTER FLANGE OUTSIDE LEFT CORNER SQUARE CENTER FLANGE OUTSIDE RIGHT CORNER |
| AGFF |
FLANGE WIDTH |
0.0950 INCHES MINIMUM AND 0.1050 INCHES MAXIMUM |
| ABGG |
(NON-CORE DATA) RADIUS |
0.0400 INCHES MINIMUM AND 0.0600 INCHES MAXIMUM 0.0400 INCHES MINIMUM AND 0.0600 INCHES MAXIMUM 0.0100 INCHES MINIMUM AND 0.0200 INCHES MAXIMUM |
| CSYM |
SURFACE FINISH |
16.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY 63.0 MICROINCHES LEFT END SURFACE OF BODY 63.0 MICROINCHES LEFT END SURFACE OF FLANGE 63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY 63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF FLANGE 32.0 MICROINCHES RIGHT END SURFACE OF BODY 63.0 MICROINCHES RIGHT END SURFACE OF FLANGE |
| AJFM |
END TO FLANGE DISTANCE |
0.1900 INCHES MINIMUM AND 0.1980 INCHES MAXIMUM |
| SR-5 |
MANUFACTURERS CODE |
73342 |
