| MRC |
Requirement Statement |
Characteristics |
| SFTT |
SURFACE TREATMENT |
PASSIVATE BOLT PASSIVATE NUT PASSIVATE SLEEVE |
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| CQFM |
HARDNESS RATING |
30.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM BOLT 30.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM NUT |
| AAZG |
HEAD MAJOR DIAMETER |
0.332 INCHES MAXIMUM |
| AAZE |
SHANK DIAMETER |
0.178 INCHES MINIMUM AND 0.180 INCHES MAXIMUM |
| MATT |
MATERIAL |
IRON ALLOY 660 BOLT IRON ALLOY 660 NUT IRON ALLOY 660 SLEEVE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BOLT QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE NUT QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SLEEVE |
| ANEE |
GRIP LENGTH |
0.220 INCHES MINIMUM AND 0.281 INCHES MAXIMUM |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS1752 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| CRSQ |
COUNTERSINK ANGLE |
100.0 DEGREES NOMINAL |
| AAZF |
SHANK STYLE |
THREADED SELF-PLUGGING SHANK W/SLEEVE |
| ABAF |
EXPANSION DEVICE |
THREADED STEM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE BOLT AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE NUT AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE SLEEVE |
