| MRC |
Requirement Statement |
Characteristics |
| CQJX |
NOMINAL THREAD SIZE |
0.375 INCHES |
| AAVX |
WASHER OUTSIDE DIAMETER |
0.680 INCHES MINIMUM AND 0.710 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE NUT MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE WASHER |
| ACTA |
NUT STYLE |
FLAT WITH TURNED BACK EDGE |
| ADEA |
NUT HEIGHT |
ANY ACCEPTABLE |
| AAWY |
COUNTERBORE DIAMETER |
0.450 INCHES MINIMUM AND 0.460 INCHES MAXIMUM NUT |
| AZKQ |
TEMP RATING |
250.0 DEG FAHRENHEIT MAXIMUM |
| SFTT |
SURFACE TREATMENT |
CADMIUM AND CHROMATE NUT CHROMATE WASHER |
| ABKW |
OVERALL HEIGHT |
0.442 INCHES MINIMUM AND 0.482 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
NOT RATED |
| BZRR |
THREAD SERIES |
UNJF |
| AAJD |
THREAD CLASS |
3B |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| ASDB |
WIDTH ACROSS FLATS |
0.553 INCHES MINIMUM AND 0.564 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
24 |
| CSXL |
III BEARING SURFACE FINISH |
125.0 MICROINCHES |
| ADFK |
NUT COUNTERBORE DEPTH |
0.218 INCHES MINIMUM AND 0.238 INCHES MAXIMUM NUT |
| MATT |
MATERIAL |
PLASTIC NYLON LOCKING INSERT STEEL COMP 1137 OR STEEL COMP 11L37 OR STEEL COMP 8740 NUT ALUMINUM ALLOY 2024 OR ALUMINUM ALLOY 7075 WASHER |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5024 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5020 ASSN STD 2ND MATERIAL RESPONSE OR AMS 6322 ASSN STD 3RD MATERIAL RESPONSE OR AMS 6323 ASSN STD 3RD MATERIAL RESPONSE OR AMS 6325 ASSN STD 3RD MATERIAL RESPONSE OR AMS 6327 ASSN STD 3RD MATERIAL RESPONSE OR AMS 6358 ASSN STD 3RD MATERIAL RESPONSE NUT QQ-A-225/6,T4 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-250/13,T6 FED SPEC 2ND MATERIAL RESPONSE WASHER |
| AAUM |
LOCKING FEATURE |
PREVAILING TORQUE WITH NONMETALLIC INSERT |
