| MRC |
Requirement Statement |
Characteristics |
| SFTT |
SURFACE TREATMENT |
PASSIVATE BOLT PASSIVATE NUT PASSIVATE SLEEVE |
| AAZG |
HEAD MAJOR DIAMETER |
0.378 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| CQFM |
HARDNESS RATING |
30.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM BOLT 30.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM NUT |
| AAZE |
SHANK DIAMETER |
0.197 INCHES MINIMUM AND 0.199 INCHES MAXIMUM |
| ABAF |
EXPANSION DEVICE |
SERRATED STEM-TYPE W |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| MATT |
MATERIAL |
IRON ALLOY 660 BOLT IRON ALLOY 660 NUT IRON ALLOY 660 SLEEVE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BOLT QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE NUT QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SLEEVE |
| AASB |
FASTENER LENGTH |
0.276 INCHES MINIMUM AND 0.306 INCHES MAXIMUM |
| AAZF |
SHANK STYLE |
THREADED SELF-PLUGGING SHANK W/SLEEVE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE BOLT AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE NUT AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE SLEEVE |
| ANEE |
GRIP LENGTH |
0.157 INCHES MINIMUM AND 0.219 INCHES MAXIMUM |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS1672 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
