| MRC |
Requirement Statement |
Characteristics |
| SFTT |
SURFACE TREATMENT |
CADMIUM AND CHROMATE BOLT CADMIUM AND CHROMATE NUT CADMIUM AND CHROMATE AND PASSIVATE SLEEVE |
| MATT |
MATERIAL |
STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 4130 BOLT STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 4130 NUT STEEL COMP 304 OR STEEL COMP 303F OR STEEL COMP 303 SLEEVE |
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 3RD MATERIAL RESPONSE BOLT MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 3RD MATERIAL RESPONSE NUT QQ-S-763 FED SPEC 1ST MATERIAL RESPONSE OR AMS 5639 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5641 ASSN STD 2ND MATERIAL RESPONSE OR ASTM A582 ASSN STD 3RD MATERIAL RESPONSE SLEEVE |
| SR-5 |
THE MANUFACTURERS DATA |
|
| CQFM |
HARDNESS RATING |
39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM BOLT 39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM NUT |
| AASU |
HEAD HEIGHT |
0.080 INCHES NOMINAL |
| SR-5 |
MANUFACTURERS CODE |
92541 |
| SR-5 |
DESIGN CONTROL REFERENCE |
FF0200-12 |
| ABAF |
EXPANSION DEVICE |
THREADED MANDREL |
| CRSQ |
COUNTERSINK ANGLE |
100.0 DEGREES NOMINAL |
| AASB |
FASTENER LENGTH |
0.855 INCHES NOMINAL |
| ANEE |
GRIP LENGTH |
0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM |
| AAZF |
SHANK STYLE |
THREADED SELF-PLUGGING SHANK W/SLEEVE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE BOLT QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE NUT QQ-P-416 TY 2 CL 2 FED SPEC 1ST TREATMENT RESPONSE AND QQ-P-35 FED SPEC 2ND TREATMENT RESPONSE SLEEVE |
| AAZE |
SHANK DIAMETER |
0.213 INCHES MINIMUM AND 0.215 INCHES MAXIMUM |
| AAZG |
HEAD MAJOR DIAMETER |
0.342 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
