| MRC |
Requirement Statement |
Characteristics |
| CRBB |
FREQUENCY BAND WIDTH PER FUNCTION |
11.375 MEGAHERTZ BLANK AND 11.575 MEGAHERTZ BLANK |
| AKEJ |
MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR |
UNC |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| AFGA |
III OPERATING TEMP RANGE |
70.0 TO 90.0 DEG FAHRENHEIT |
| AHAU |
INPUT IMPEDANCE PER FUNCTION W/LOAD |
50.0 OHMS BLANK |
| AHAJ |
REFERENCE FREQUENCY PER FUNCTION |
11.475 MEGAHERTZ BLANK |
| CQDR |
INSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS |
3.0 BLANK |
| CQRG |
III BODY MATERIAL |
METAL |
| CQJX |
NOMINAL THREAD SIZE |
0.112 INCHES |
| ABKW |
OVERALL HEIGHT |
1.273 INCHES NOMINAL |
| SR-1 |
MFR SOURCE CONTROLLING REFERENCE |
4011351-0704 |
| AFSV |
III AVERAGE LIFE RATING IN HOURS |
400000.0 |
| STYL |
STYLE DESIGNATOR |
RECTANGULAR TERMINAL/TERMINALS ON ONE SURFACE |
| AEBY |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH |
2.300 INCHES NOMINAL |
| CQDW |
FUNCTIONAL TERMINAL TYPE AND QUANTITY |
1 TAB, SOLDER LUG INPUT 1ST FUNCTION 1 TAB, SOLDER LUG OUTPUT 2ND FUNCTION |
| CQFC |
III SPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION |
11.10 MEGAHERTZ BLANK AND 11.375 MEGAHERTZ BLANK AND 11.575 MEGAHERTZ BLANK AND 11.85 MEGAHERTZ BLANK |
| CRBC |
III DISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS |
60.0 MINIMUM BLANK AND 6.0 MAXIMUM BLANK AND 6.0 MAXIMUM BLANK AND 60.0 MINIMUM BLANK |
| ADAQ |
BODY LENGTH |
2.800 INCHES NOMINAL |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
4 THREADED STUD |
| ADAU |
BODY HEIGHT |
1.038 INCHES NOMINAL |
| AHAV |
OUTPUT IMPEDANCE PER FUNCTION W/SOURCE ACROSS INPUT |
50.0 OHMS BLANK |
| AKNA |
INCLOSURE TYPE |
HERMETICALLY SEALED |
| AEHA |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH |
0.500 INCHES NOMINAL |
| ADAT |
BODY WIDTH |
1.000 INCHES NOMINAL |
| SR-1 |
MANUFACTURERS CODE |
06845 |
| TEST |
TEST DATA DOCUMENT |
06845-4011351-0704 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
