| MRC |
Requirement Statement |
Characteristics |
| CRDW |
HYDROSTATIC TEST PRESSURE |
350.0 POUNDS PER SQUARE INCH |
| CBBL |
FEATURES PROVIDED |
ELECTROSTATIC DISCHARGE CAPABILITY |
| CRFY |
FLOW ANGLE |
90.0 DEGREES 2ND END |
| CMLP |
THREAD QUANTITY PER INCH |
14 2ND END |
| ADJS |
EXTERIOR COLOR |
NATURAL |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END THREADED INTERNAL TUBE 2ND END |
| CRZY |
(NON-CORE DATA) SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| AAJD |
THREAD CLASS |
3B 1ST END 3B 2ND END |
| CRLL |
(NON-CORE DATA) SECOND END FITTING/COMPONENT AND SURFACE TREATMENT |
NIPPLE ANODIZED, MIL-A-8625 NUT ANODIZED, MIL-A-8625 SOCKET ANODIZED, MIL-A-8625 |
| CRBL |
(NON-CORE DATA) SECOND END FITTING/COMPONENT AND MATERIAL |
NIPPLE ALUMINUM ALLOY, AMS 4117, ALLOY 6061, T6 NUT,ALUMINUM ALLOY,AMS 4117 COMP 2024,TEMPER T6 SLEEVE,ALUMINUM ALLOY,AMS 4115 COMP 6061,TEMPER 0 |
| THSD |
THREAD SERIES DESIGNATOR |
UNF 1ST END UNJ 2ND END |
| CRXX |
MEASURING METHOD AND LENGTH |
21.000 INCHES NOMINAL OVERALL |
| CQRB |
SEAT ANGLE |
12.0 DEGREES 1ST END 12.0 DEGREES 2ND END |
| AARX |
INSIDE DIAMETER |
0.750 INCHES MINIMUM AND 0.780 INCHES MAXIMUM |
| CQBD |
BURST TEST PRESSURE |
700.0 POUNDS PER SQUARE INCH |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
2.000 INCHES |
| CQJX |
NOMINAL THREAD SIZE |
1.062 INCHES 1ST END 1.062 INCHES 2ND END |
| ADJM |
(NON-CORE DATA) INNER CONVEYING TUBE MATERIAL |
PLASTIC, POLYTETRAFLUOROETHYLENE |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END ELBOW 2ND END |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| ABKV |
OUTSIDE DIAMETER |
1.090 INCHES MAXIMUM |
| MEDA |
MEDIA FOR WHICH DESIGNED |
FLUID SINGLE RESPONSE |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
CORROSION RESISTANT |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END RIGHT-HAND 2ND END |
| CQBG |
(NON-CORE DATA) FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT, FLARELESS 1ST END SWIVEL NUT, FLARELESS 2ND END |
| CQGH |
(NON-CORE DATA) FIRST END FITTING/COMPONENT AND MATERIAL |
NIPPLE ALUMINUM ALLOY, AMS 4117, ALLOY 6061, T6 NUT,ALUMINUM ALLOY,AMS 4117 COMP 2024,TEMPER T6 SLEEVE,ALUMINUM ALLOY,AMS 4115 COMP 6061,TEMPER 0 |
| ABJH |
TEMP RATING |
-65.0 DEG FAHRENHEIT AND 350.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CQBB |
(NON-CORE DATA) SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| AAJP |
(NON-CORE DATA) OUTSIDE SURFACE TREATMENT |
PASSIVATED |
| CQGM |
MAXIMUM OPERATING PRESSURE |
175.0 POUNDS PER SQUARE INCH |
| CQHW |
(NON-CORE DATA) FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
NIPPLE ANODIZED, MIL-A-8625 NUT ANODIZED, MIL-A-8625 SLEEVE ANODIZED, MIL-A-8625 |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER POLYTETRAFLUOROETHYLENE IMPREGNATED GLASS FIBER OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| CRWL |
INSIDE SURFACE CONDITION |
CONVOLUTED |
