| MRC |
Requirement Statement |
Characteristics |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 1ST END 37.0 DEGREES 2ND END |
| CRSM |
VACUUM IN TORR |
50.8 |
| AARX |
INSIDE DIAMETER |
0.785 INCHES NOMINAL |
| CRBL |
(NON-CORE DATA) SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL, CORROSION RESISTING |
| CQJX |
NOMINAL THREAD SIZE |
1.062 INCHES 1ST END 0.875 INCHES 2ND END |
| ADJS |
EXTERIOR COLOR |
NATURAL |
| CRZY |
(NON-CORE DATA) SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CBBL |
FEATURES PROVIDED |
NUTS DRILLED FOR LOCKWIRE |
| CMLP |
THREAD QUANTITY PER INCH |
12 1ST END |
| CQGM |
MAXIMUM OPERATING PRESSURE |
650.0 POUNDS PER SQUARE INCH |
| CQHW |
(NON-CORE DATA) FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING PASSIVATED |
| CRXX |
MEASURING METHOD AND LENGTH |
21.000 INCHES NOMINAL WORKING |
| ADJM |
(NON-CORE DATA) INNER CONVEYING TUBE MATERIAL |
PLASTIC, POLYTETRAFLUOROETHYLENE |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| CQGH |
(NON-CORE DATA) FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL, CORROSION RESISTING |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END STRAIGHT 2ND END |
| CQBD |
BURST TEST PRESSURE |
2600.0 POUNDS PER SQUARE INCH |
| ABJH |
TEMP RATING |
-65.0 DEG FAHRENHEIT AND 400.0 DEG FAHRENHEIT SINGLE RESPONSE |
| AAJD |
THREAD CLASS |
3B 1ST END 3A 2ND END |
| CRDW |
HYDROSTATIC TEST PRESSURE |
1300.0 POUNDS PER SQUARE INCH |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
CORROSION RESISTANT |
| THSD |
THREAD SERIES DESIGNATOR |
UN 1ST END UNF 2ND END |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END RIGHT-HAND 2ND END |
| CQBG |
(NON-CORE DATA) FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END THREADED EXTERNAL TUBE 2ND END |
| CRLL |
(NON-CORE DATA) SECOND END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING PASSIVATED |
| CQBB |
(NON-CORE DATA) SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 1ST END FLARED 2ND END |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
3.750 INCHES |
| AAJP |
(NON-CORE DATA) OUTSIDE SURFACE TREATMENT |
PASSIVATED |
| CRWL |
INSIDE SURFACE CONDITION |
CONVOLUTED |
| ABKV |
OUTSIDE DIAMETER |
1.075 INCHES NOMINAL |
