| MRC |
Requirement Statement |
Characteristics |
| SR-5 |
DESIGN CONTROL REFERENCE |
K671164-13 |
| ADAS |
BODY INSIDE DIAMETER |
1.5115 INCHES MINIMUM AND 1.5120 INCHES MAXIMUM |
| CTMQ |
SURFACE GROOVE LOCATION AND QUANTITY |
1 INTERNAL |
| AGKH |
LUBRICANT ACCOMMODATION STYLE |
GROOVED OPEN BOTH ENDS |
| MATT |
MATERIAL |
STEEL UNS K24065 OVERALL |
| AAZP |
(NON-CORE DATA) CHAMFER LENGTH |
0.2200 INCHES NOMINAL 0.2200 INCHES NOMINAL |
| AAUB |
HOLE DIAMETER |
0.2500 INCHES NOMINAL FIRST |
| SR-5 |
THE MANUFACTURERS DATA |
|
| SR-5 |
MANUFACTURERS CODE |
84955 |
| CBBL |
FEATURES PROVIDED |
CASEHARDENED |
| CTJM |
ANTIROTATION/LUBRICATION TYPE AND QUANTITY |
1 HOLE |
| STYL |
STYLE DESIGNATOR |
SOLID |
| FEAT |
SPECIAL FEATURES |
PARTIAL GROOVE CUT ON O.D. ACROSS HOLE DRILLED THROUGH ONE WALL |
| ADAR |
BODY OUTSIDE DIAMETER |
1.7545 INCHES MINIMUM AND 1.7550 INCHES MAXIMUM |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY 32.0 MICROINCHES LEFT END SURFACE OF BODY 32.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY 32.0 MICROINCHES RIGHT END SURFACE OF BODY |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6709,COMP A,COND C MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| ABHP |
OVERALL LENGTH |
2.0000 INCHES NOMINAL |
| CSYT |
(NON-CORE DATA) CHAMFER ANGLE |
5.0 DEGREES NOMINAL 5.0 DEGREES NOMINAL |
| BZLX |
CORNER SHAPE |
SQUARE OUTSIDE LEFT CORNER SQUARE OUTSIDE RIGHT CORNER CHAMFERED INSIDE RIGHT CORNER CHAMFERED INSIDE LEFT CORNER |
