| MRC |
Requirement Statement |
Characteristics |
| CWBH |
SHAFT NOMINAL THREAD SIZE |
0.190 INCHES SINGLE SHAFT |
| SR-1 |
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
MIL-S-20708/131 |
| AKAF |
SHAFT THREAD DIRECTION |
RIGHT-HAND SINGLE SHAFT |
| AJSV |
ROTOR INPUT ELECTRICAL POWER RATING |
1.4 WATTS MAXIMUM |
| AJVW |
ALIGNMENT HOLE QUANTITY |
4 |
| AJTN |
ZSS IMPEDANCE MAGNITUDE IN OHMS |
1.50 NOMINAL |
| AJTH |
ZRO IMPEDANCE ANGLE IN DEG |
84.50 NOMINAL |
| CQWQ |
SHAFT THREAD LENGTH |
0.2000 INCHES NOMINAL SINGLE SHAFT |
| AKAN |
SHAFT THREAD CLASS |
2A SINGLE SHAFT |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| AJSS |
FREQUENCY IN HERTZ |
400.0 NOMINAL |
| AJST |
ROTOR INPUT CURRENT RATING |
100.0 MILLIAMPERES MAXIMUM |
| AJVL |
ELECTRICAL ERROR ANGULAR RANGE IN MINUTES |
-6.0 TO 6.0 |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-S-20708/131 GOVERNMENT SPECIFICATION |
| AJVF |
PHASE SHIFT ANGLE IN DEG |
2.500 INPUT TO OUTPUT NOMINAL |
| ABKK |
FLANGE DIAMETER |
1.4340 INCHES MINIMUM AND 1.4370 INCHES MAXIMUM |
| AJVT |
ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS |
0.05 INCH-OUNCES MAXIMUM |
| AJVG |
MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT |
12.00 OUTPUT |
| CSJY |
TRANSFORMATION RATIO |
0.103 STATOR TO ROTOR NOMINAL |
| ABXF |
SHAFT LENGTH |
0.5400 INCHES NOMINAL SINGLE SHAFT |
| AJVH |
MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT |
25.00 |
| SR-1 |
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
M20708/131-01F |
| AFJN |
III FRAGILITY FACTOR |
MODERATELY RUGGED |
| TTQY |
TERMINAL TYPE AND QUANTITY |
5 SCREW |
| AJSL |
BODY SIZE |
15 |
| AJYY |
SHAFT THREAD SERIES DESIGNATOR |
UNF SINGLE SHAFT |
| AAFZ |
BODY MATERIAL |
STEEL, CORROSION RESISTING |
| SR-1 |
MANUFACTURERS CODE |
81349 |
| AJWR |
SHOULDER LENGTH |
0.1320 INCHES NOMINAL |
| AJVM |
SPLINE TOOTH QUANTITY |
21 SINGLE SHAFT |
| CQTM |
TERMINAL LOCATION |
REAR |
| ABHP |
OVERALL LENGTH |
2.3120 INCHES NOMINAL |
| AJTG |
ZRO IMPEDANCE MAGNITUDE IN OHMS |
1800.00 NOMINAL |
| ABWV |
SHAFT DIAMETER |
0.1867 INCHES MINIMUM AND 0.1872 INCHES MAXIMUM SINGLE SHAFT |
| AJWX |
MOUNTING SURFACE TO TERMINAL END DISTANCE |
1.7720 INCHES NOMINAL |
| ABKU |
FLANGE THICKNESS |
0.0930 INCHES NOMINAL |
| AJTP |
ZSS IMPEDANCE ANGLE IN DEG |
25.00 NOMINAL |
| ABPA |
UNDERCUT DIAMETER |
1.3120 INCHES NOMINAL |
| CTCW |
ALIGNMENT HOLE BOLT CIRCLE DIAMETER |
1.0000 INCHES NOMINAL |
| AAVL |
PILOT DIAMETER |
0.8745 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM |
| AHCG |
MAXIMUM TEMP RISE |
20.0 DEG CELSIUS |
| AAQL |
BODY STYLE |
STANDARD ROUND C |
| AAVH |
SHOULDER DIAMETER |
1.3115 INCHES MINIMUM AND 1.3120 INCHES MAXIMUM |
| CRSY |
ALIGNMENT HOLE DEPTH |
0.1250 INCHES MINIMUM |
| AJWQ |
PILOT LENGTH |
0.0400 INCHES NOMINAL |
| AJSR |
ROTOR INPUT VOLTAGE RATING IN VOLTS |
115.0 NOMINAL |
| ABPC |
UNDERCUT WIDTH |
0.0780 INCHES NOMINAL |
| CRSJ |
SHAFT TYPE |
SPLINE W/THREADS SINGLE SHAFT |
| AJXA |
SPLINE TOOTH DIAMETRAL PITCH |
120 SINGLE SHAFT |
