| MRC |
Requirement Statement |
Characteristics |
| AKAF |
SHAFT THREAD DIRECTION |
RIGHT-HAND SINGLE SHAFT |
| AJTP |
ZSS IMPEDANCE ANGLE IN DEG |
16.00 MINIMUM AND 24.00 MAXIMUM |
| CSJY |
TRANSFORMATION RATIO |
0.783 ROTOR TO STATOR NOMINAL |
| AKAN |
SHAFT THREAD CLASS |
2A SINGLE SHAFT |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| AJVF |
PHASE SHIFT ANGLE IN DEG |
6.500 INPUT TO OUTPUT MAXIMUM |
| AJVL |
ELECTRICAL ERROR ANGULAR RANGE IN MINUTES |
-10.0 TO 10.0 |
| AJVH |
MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT |
170.00 |
| AJXA |
SPLINE TOOTH DIAMETRAL PITCH |
96 SINGLE SHAFT |
| AJSS |
FREQUENCY IN HERTZ |
60.0 NOMINAL |
| ABXF |
SHAFT LENGTH |
0.7300 INCHES NOMINAL SINGLE SHAFT |
| AJWR |
SHOULDER LENGTH |
0.6150 INCHES NOMINAL |
| AHCG |
MAXIMUM TEMP RISE |
35.0 DEG CELSIUS |
| CQWQ |
SHAFT THREAD LENGTH |
0.3100 INCHES NOMINAL SINGLE SHAFT |
| AAVH |
SHOULDER DIAMETER |
2.6950 INCHES MINIMUM AND 2.7000 INCHES MAXIMUM |
| AJTN |
ZSS IMPEDANCE MAGNITUDE IN OHMS |
24.00 MINIMUM AND 33.00 MAXIMUM |
| AAZW |
SECOND SHOULDER DIAMETER |
2.7500 INCHES MINIMUM AND 2.7510 INCHES MAXIMUM |
| SR-1 |
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
M20708/66-01A |
| AFJN |
III FRAGILITY FACTOR |
MODERATELY RUGGED |
| TTQY |
TERMINAL TYPE AND QUANTITY |
5 SCREW |
| ABKU |
FLANGE THICKNESS |
0.2500 INCHES NOMINAL |
| ABHP |
OVERALL LENGTH |
5.1000 INCHES NOMINAL |
| AJYY |
SHAFT THREAD SERIES DESIGNATOR |
UNF SINGLE SHAFT |
| AAFZ |
BODY MATERIAL |
STEEL, CORROSION RESISTING |
| ABKK |
FLANGE DIAMETER |
2.0990 INCHES MINIMUM AND 3.1000 INCHES MAXIMUM |
| SR-1 |
MANUFACTURERS CODE |
81349 |
| CWBH |
SHAFT NOMINAL THREAD SIZE |
0.250 INCHES SINGLE SHAFT |
| AAZX |
SECOND SHOULDER LENGTH |
0.3750 INCHES NOMINAL |
| AJSV |
ROTOR INPUT ELECTRICAL POWER RATING |
6.6 WATTS MAXIMUM |
| AJWX |
MOUNTING SURFACE TO TERMINAL END DISTANCE |
4.1200 INCHES NOMINAL |
| ABWV |
SHAFT DIAMETER |
0.2403 INCHES MINIMUM AND 0.2405 INCHES MAXIMUM SINGLE SHAFT |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-S-20708/66 GOVERNMENT SPECIFICATION |
| CQTM |
TERMINAL LOCATION |
REAR |
| AJVM |
SPLINE TOOTH QUANTITY |
22 SINGLE SHAFT |
| AJVG |
MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT |
35.00 OUTPUT |
| AJSL |
BODY SIZE |
31 |
| AJWQ |
PILOT LENGTH |
0.0300 INCHES NOMINAL |
| AJST |
ROTOR INPUT CURRENT RATING |
440.0 MILLIAMPERES MAXIMUM |
| ABPM |
BODY DIAMETER |
2.7000 INCHES MAXIMUM |
| AJVV |
TORQUE GRADIENT PER ANGULAR DEG |
0.400 INCH-OUNCES MAXIMUM |
| AAQL |
BODY STYLE |
STANDARD ROUND D |
| AJSR |
ROTOR INPUT VOLTAGE RATING IN VOLTS |
115.0 NOMINAL |
| AJVN |
RECEIVER ERROR ANGULAR RANGE IN MINUTES |
-36.0 TO 36.0 |
| CRSJ |
SHAFT TYPE |
SPLINE W/THREADS SINGLE SHAFT |
| AJWV |
AFT OF FIRST FLANGE DIAMETER |
2.7490 INCHES MINIMUM AND 2.7500 INCHES MAXIMUM |
