| MRC |
Requirement Statement |
Characteristics |
| CQBD |
BURST TEST PRESSURE |
750.0 POUNDS PER SQUARE INCH |
| ABKV |
OUTSIDE DIAMETER |
3.000 INCHES NOMINAL |
| CQJX |
NOMINAL THREAD SIZE |
2.000 INCHES 1ST END 2.000 INCHES 2ND END |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
ABRASION RESISTANT AND HEAT RESISTANT |
| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| SR-1 |
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
M285963A650 |
| ZZZW |
(NON-CORE DATA) DEPARTURE FROM CITED DOCUMENT |
AS MODIFIED BY END CONNECTIONS |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL HOSE 1ST END THREADED EXTERNAL HOSE 2ND END |
| CRBL |
(NON-CORE DATA) SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| CRZY |
(NON-CORE DATA) SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| SR-1 |
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
MIL-H-28596 |
| AARX |
INSIDE DIAMETER |
2.000 INCHES NOMINAL |
| CRXX |
MEASURING METHOD AND LENGTH |
600.000 INCHES NOMINAL EXCLUDING END FITTINGS |
| CQGM |
MAXIMUM OPERATING PRESSURE |
75.0 POUNDS PER SQUARE INCH |
| FEAT |
SPECIAL FEATURES |
END CONNECTIONS ATTACHED TO HOSE BY 4 BOLT FINGER TYPE CLAMP |
| SR-1 |
MANUFACTURERS CODE |
81349 |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| CMLP |
THREAD QUANTITY PER INCH |
11-1/2 1ST END 11-1/2 2ND END |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END STRAIGHT 2ND END |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT, GASKET SEAL 1ST END PLAIN 2ND END |
| CRDW |
HYDROSTATIC TEST PRESSURE |
300.0 POUNDS PER SQUARE INCH |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END RIGHT-HAND 2ND END |
| CQBG |
(NON-CORE DATA) FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER WRAPPED RUBBER, SYNTHETIC OR OUTER LAYER WRAPPED RUBBER, NATURAL |
| ABJH |
TEMP RATING |
320.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MARK |
SPECIAL MARKINGS |
BRANDED W/WORD -STEAM- |
| ADJM |
(NON-CORE DATA) INNER CONVEYING TUBE MATERIAL |
RUBBER, NATURAL OR RUBBER, SYNTHETIC |
| CQBB |
(NON-CORE DATA) SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| THSD |
THREAD SERIES DESIGNATOR |
NPSH 1ST END NPSH 2ND END |
| CQGH |
(NON-CORE DATA) FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
