| MRC |
Requirement Statement |
Characteristics |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL HOSE 1ST END THREADED EXTERNAL BOSS 2ND END |
| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| CBBL |
FEATURES PROVIDED |
ELECTROSTATIC DISCHARGE CAPABILITY |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
ABRASION RESISTANT AND LIGHT RESISTANT AND OIL RESISTANT AND OXIDATION RESISTANT AND OZONE RESISTANT |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-H-71505 GOVERNMENT SPECIFICATION |
| CQGH |
(NON-CORE DATA) FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING BRONZE |
| CRZY |
(NON-CORE DATA) SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER MOLDED RUBBER, CHLOROPRENE 2ND LAYER RUBBER IMPREGNATED WOVEN FABRIC 3RD LAYER HELIX WIRE COIL 4TH LAYER RUBBER IMPREGNATED WOVEN FABRIC OUTER LAYER MOLDED RUBBER, CHLOROPRENE |
| CQBD |
BURST TEST PRESSURE |
600.0 POUNDS PER SQUARE INCH |
| CRXX |
MEASURING METHOD AND LENGTH |
600.000 INCHES NOMINAL EXCLUDING END FITTINGS |
| CQJX |
NOMINAL THREAD SIZE |
4.000 INCHES 1ST END 4.000 INCHES 2ND END |
| ADJM |
(NON-CORE DATA) INNER CONVEYING TUBE MATERIAL |
RUBBER, SYNTHETIC |
| SR-1 |
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
MP17505FA55000 |
| SR-1 |
MANUFACTURERS CODE |
81349 |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| CQBG |
(NON-CORE DATA) FIRST END SWIVEL ACTION CAPABILITY |
INCLUDED |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END STRAIGHT 2ND END |
| CRDW |
HYDROSTATIC TEST PRESSURE |
250.0 POUNDS PER SQUARE INCH |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END RIGHT-HAND 2ND END |
| THSD |
THREAD SERIES DESIGNATOR |
NH-SPCL 1ST END NH-SPCL 2ND END |
| CQGM |
MAXIMUM OPERATING PRESSURE |
150.0 POUNDS PER SQUARE INCH |
| MEDA |
MEDIA FOR WHICH DESIGNED |
FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| CRBL |
(NON-CORE DATA) SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING BRONZE |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT, GASKET SEAL 1ST END EXTERNAL SEAT FOR GASKET SEAL (BOSS) 2ND END |
| CQBB |
(NON-CORE DATA) SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| AARX |
INSIDE DIAMETER |
4.000 INCHES NOMINAL |
