| MRC |
Requirement Statement |
Characteristics |
| CWPK |
INSULATION RESISTANCE AT REFERENCE TEMP |
30000.0 MEGOHMS |
| CWPM |
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT |
0.1500 |
| AEBP |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH |
0.400 INCHES NOMINAL |
| CQWM |
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION |
50.0 DC SINGLE SECTION |
| CQBQ |
CAPACITANCE VALUE PER SECTION |
0.039 MICROFARADS SINGLE SECTION |
| CQJJ |
NONDERATED OPERATING TEMP |
-55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM |
| CRHD |
TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS |
-30.0 TO 30.0 SINGLE SECTION |
| ADAU |
BODY HEIGHT |
0.160 INCHES MAXIMUM |
| AEBT |
TERMINAL DIAMETER |
0.024 INCHES MINIMUM AND 0.029 INCHES MAXIMUM |
| ABMK |
(NON-CORE DATA) OVERALL WIDTH |
0.510 INCHES MAXIMUM |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| ADAQ |
BODY LENGTH |
0.510 INCHES MAXIMUM |
| TTQY |
TERMINAL TYPE AND QUANTITY |
2 UNINSULATED WIRE LEAD |
| AARF |
III MIL-STD-1276 WIRE LEAD TYPE DESIGNATOR |
N-4 |
| CRTP |
TOLERANCE RANGE PER SECTION |
-2.00 TO 2.00 PERCENT SINGLE SECTION |
| ADAT |
BODY WIDTH |
0.510 INCHES MAXIMUM |
| CQLZ |
TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS |
0.0 SINGLE SECTION |
| CWJK |
CASE MATERIAL |
PLASTIC |
| ABJT |
TERMINAL LENGTH |
1.250 INCHES MINIMUM |
| ABHP |
(NON-CORE DATA) OVERALL LENGTH |
0.510 INCHES MAXIMUM |
| AEBZ |
SCHEMATIC DIAGRAM DESIGNATOR |
NO COMMON OR GROUNDED ELECTRODE(S) |
| ABKW |
(NON-CORE DATA) OVERALL HEIGHT |
0.160 INCHES MAXIMUM |
| CQBF |
III INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP |
3000.0 MEGOHMS |
| AAQL |
BODY STYLE |
W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE |
