| MRC |
Requirement Statement |
Characteristics |
| CPSM |
INTERNAL TRIP RELEASE CONFIGURATION |
SERIES TRIP SINGLE LOCATION |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
2 THREADED HOLE |
| FREQ |
FREQUENCY IN HERTZ |
400.0 SINGLE LOCATION |
| CPRH |
CIRCUIT PROTECTION TYPE |
OVERCURRENT SINGLE LOCATION |
| CPRT |
MANUAL ACTUATOR TYPE AND QUANTITY |
1 PUSH-PULL |
| CPRL |
TRIP RELEASE CHARACTERISTIC |
TIME DELAY SINGLE LOCATION |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| CPRW |
ACTUATOR FUNCTION |
TRIP-RESET |
| CPRJ |
TRIP RELEASE METHOD |
MAGNETIC SINGLE LOCATION |
| TTQY |
TERMINAL TYPE AND QUANTITY |
2 TAB W/SCREW |
| CQWN |
TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT |
16.000 MINIMUM AT 200 PCT AND 40.000 MAXIMUM AT 200 PCT SINGLE LOCATION |
| CPRQ |
RESET METHOD |
MANUAL |
| SR-1 |
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
MIL-DTL-27715 |
| PKWT |
III UNPACKAGED UNIT WEIGHT |
0.200 POUNDS |
| CQXF |
INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED |
EXPLOSION PROOF AND HUMIDITY PROOF AND SALT SPRAY PROOF AND SANDTIGHT AND DUSTTIGHT AND VAPORTIGHT AND SHOCK RESISTANT AND FUNGUS PROOF |
| CPRG |
MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS |
5000.0 AC AND 5000.0 DC SINGLE LOCATION |
| AEBY |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH |
1.800 INCHES MINIMUM AND 1.820 INCHES MAXIMUM |
| BBRJ |
III SPECIAL HANDLING FEATURE |
MAGNETIC |
| AFJN |
III FRAGILITY FACTOR |
MODERATELY RUGGED |
| AAQL |
BODY STYLE |
SINGLE POLE TYPE |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
| SR-1 |
MANUFACTURERS CODE |
81349 |
| ADTV |
CASE MATERIAL |
PLASTIC |
| CPRR |
MAIN CONTACT TRIPPING MECHANISM TYPE |
TRIP FREE |
| CPRN |
ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT |
138.0 SINGLE LOCATION |
| CPRF |
OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS |
115.0 AC AND 28.0 DC SINGLE LOCATION |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| BBRG |
III STORAGE TYPE |
GENERAL PURPOSE WAREHOUSE |
| CQJX |
NOMINAL THREAD SIZE |
0.138 INCHES |
| CPLM |
MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE |
7.5 AMPERES AC AND 7.5 AMPERES DC SINGLE LOCATION |
| AKPX |
POLE QUANTITY |
1 |
| ADAQ |
BODY LENGTH |
2.189 INCHES MAXIMUM |
| SR-1 |
MANUFACTURERS CODE |
96906 |
| ZZZK |
SPECIFICATION/STANDARD DATA |
96906-MS24571 GOVERNMENT STANDARD |
| AJWX |
MOUNTING SURFACE TO TERMINAL END DISTANCE |
2.370 INCHES NOMINAL |
| AEBP |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH |
1.190 INCHES NOMINAL |
| SR-1 |
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
MS24571-7 |
| ADAT |
BODY WIDTH |
0.760 INCHES MAXIMUM |
| CPRX |
ACTUATOR POSITION DESIGNATION |
AT POLE ONE |
| ABXD |
BUSHING LENGTH |
0.187 INCHES MINIMUM AND 0.249 INCHES MAXIMUM |
