| MRC |
Requirement Statement |
Characteristics |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE BODY QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE STEM |
| ANEE |
GRIP LENGTH |
0.204 INCHES MINIMUM AND 0.234 INCHES MAXIMUM |
| SR-1 |
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
MS24661-13 |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2117 BODY ALUMINUM ALLOY 2117 OR ALUMINUM ALLOY 5056 SLEEVE STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 303F OR STEEL COMP 303S OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 323 OR STEEL COMP 324 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 385 STEM |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 102.0 DEGREES MAXIMUM |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| AAZF |
SHANK STYLE |
DRIVE PIN |
| AAZE |
SHANK DIAMETER |
0.123 INCHES MINIMUM AND 0.127 INCHES MAXIMUM |
| AASB |
FASTENER LENGTH |
0.302 INCHES MINIMUM AND 0.342 INCHES MAXIMUM |
| AAZG |
HEAD MAJOR DIAMETER |
0.221 INCHES MINIMUM AND 0.229 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
ANODIZE BODY PASSIVATE STEM |
| SR-1 |
MANUFACTURERS CODE |
96906 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-430,T4 FED SPEC SINGLE MATERIAL RESPONSE BODY QQ-A-430 FED SPEC ALL MATERIAL RESPONSES SLEEVE 66 FED STD ALL MATERIAL RESPONSES STEM |
| ABAF |
EXPANSION DEVICE |
DRIVE STEM-TYPE H |
