| MRC |
Requirement Statement |
Characteristics |
| BZRR |
THREAD SERIES |
UNF |
| AZKQ |
TEMP RATING |
NOT RATED |
| ADFU |
MOUNTING HOLE ARRANGEMENT STYLE |
2 HOLES |
| ADFY |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH |
0.310 INCHES MINIMUM AND 0.314 INCHES MAXIMUM |
| CQJX |
NOMINAL THREAD SIZE |
0.250 INCHES |
| ADEB |
PLATE THICKNESS |
0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
| ACTA |
NUT STYLE |
PLATE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE BASE MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE NUT |
| AAJD |
THREAD CLASS |
3B |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 BASE PLASTIC POLYAMIDE LOCKING INSERT ALUMINUM ALLOY 2024 NUT |
| CQFM |
HARDNESS RATING |
25.0 ROCKWELL C NOMINAL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CMLP |
THREAD QUANTITY PER INCH |
28 |
| ADEA |
NUT HEIGHT |
0.345 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| ADFP |
NUT MOUNTING PROVISION |
STRAIGHT HOLES |
| ADFW |
DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER |
0.329 INCHES MINIMUM AND 0.359 INCHES MAXIMUM |
| ADEC |
PLATE WIDTH |
0.444 INCHES MINIMUM AND 0.464 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
ANODIZE BASE ANODIZE NUT |
| ACVN |
NUT LENGTH |
1.008 INCHES MINIMUM AND 1.038 INCHES MAXIMUM |
| AAUM |
LOCKING FEATURE |
PREVAILING TORQUE WITH NONMETALLIC INSERT |
| ABTB |
MOUNTING HOLE DIAMETER |
0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
