| MRC |
Requirement Statement |
Characteristics |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS1189 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| CQFM |
HARDNESS RATING |
36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| AAUM |
LOCKING FEATURE |
PELLET OR STRIP THREADS |
| SFTT |
SURFACE TREATMENT |
CADMIUM AND CHROMATE OVERALL |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| AAJD |
THREAD CLASS |
3A |
| AASK |
HEAD STYLE |
FLAT COUNTERSUNK |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| ABQZ |
INTERNAL DRIVE STYLE |
OFFSET CRUCIFORM (TORQUE SET) |
| AASL |
HEAD DIAMETER |
0.322 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AHYM |
NOMINAL THREAD DIAMETER |
0.190 INCHES |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| CRSQ |
COUNTERSINK ANGLE |
100.0 DEGREES NOMINAL |
| AASB |
FASTENER LENGTH |
0.531 INCHES MINIMUM AND 0.562 INCHES MAXIMUM |
| AASA |
THREAD LENGTH |
0.389 INCHES MINIMUM AND 0.482 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8735 OR STEEL COMP 6150 OVERALL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 5TH MATERIAL RESPONSE OVERALL |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES THREADS |
