| Mfg. Part # | Mfg. Name | CAGE | RNCC | RNVC | ISC | MSDS | SADC | DAC | HCC |
|---|---|---|---|---|---|---|---|---|---|
| ACT509HT8-9 | HUCK MFG CO | 29666 | 5 | 9 | 2 | ||||
| ALP509HT8-9 | HUCK MFG CO | 29666 | C | 1 | 2 | N | |||
| NAS1458-09 | NATIONAL AEROSPACE STANDARDS | 80205 | 3 | 2 | 2 | ||||
| NAS1458-09 | HUCK INTERNATIONAL INC. | 17446 | 5 | 2 | 2 | ||||
| NAS1458-9 | BOSCH REXROTH GMBH LOHMANN | D9182 | C | 1 | 2 | N | |||
| R3002-T08-09 | HUCK INTERNATIONAL INC. | 17446 | 5 | 2 | 2 |
| MRC | Requirement Statement | Characteristics |
|---|---|---|
| AASB | FASTENER LENGTH | 2.750 INCHES MINIMUM AND 2.950 INCHES MAXIMUM |
| ANEE | GRIP LENGTH | 0.532 INCHES MINIMUM AND 0.594 INCHES MAXIMUM |
| AAZG | HEAD MAJOR DIAMETER | 0.454 INCHES MINIMUM |
| AASK | HEAD STYLE | FLUSH COUNTERSUNK |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| MATT | MATERIAL | STEEL OVERALL |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| AAZE | SHANK DIAMETER | 0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AAZF | SHANK STYLE | PIN-RIVET, MULTIPLE GROOVED |
