| MRC |
Requirement Statement |
Characteristics |
| ABKW |
OVERALL HEIGHT |
1.520 INCHES MAXIMUM |
| AKPY |
THROW QUANTITY |
6 EACH SECTION REAR |
| ABNC |
FLAT HEIGHT |
0.218 INCHES NOMINAL SINGLE ACTUATOR |
| ABHP |
OVERALL LENGTH |
2.250 INCHES MAXIMUM |
| CRSJ |
SHAFT TYPE |
ROUND, FLATTED SINGLE ACTUATOR |
| AJZE |
SWITCH CONTACT BASIC DESIGN |
NONPILE-UP SYMMETRICAL |
| ABNB |
FIRST FLAT LENGTH |
0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM SINGLE ACTUATOR |
| CQJX |
NOMINAL THREAD SIZE |
0.375 INCHES SINGLE MOUNTING FACILITY |
| AASA |
THREAD LENGTH |
0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM SINGLE MOUNTING FACILITY |
| AFGA |
III OPERATING TEMP RANGE |
-65.0 TO 85.0 DEG CELSIUS |
| CQRQ |
III SHAFT FLAT/SLOT ANGULAR LOCATION |
210.0 DEGREES FROM NONTURN DEVICE SINGLE ACTUATOR |
| CSHW |
CONTACT SWITCHING ACTION |
BREAKS BEFORE MAKES EACH SECTION REAR |
| AFBH |
INDIVIDUAL SECTION QUANTITY |
2 |
| CSMW |
III DETENT ROTATIONAL TORQUE RANGE |
2.000 TO 8.000 INCH-POUNDS SINGLE ACTUATOR |
| AEFP |
NONTURN DEVICE RADIUS |
0.410 INCHES MINIMUM AND 0.430 INCHES MAXIMUM AT 9:00 O'CLOCK |
| ABXF |
SHAFT LENGTH |
0.860 INCHES MINIMUM AND 0.890 INCHES MAXIMUM SINGLE ACTUATOR |
| CTDN |
SWITCH ACTUATOR STOP DEVICE TYPE |
FIXED STOP SINGLE ACTUATOR |
| ABMK |
OVERALL WIDTH |
1.330 INCHES MAXIMUM |
| AKPX |
POLE QUANTITY |
2 EACH SECTION FRONT |
| CSCF |
TERMINAL TYPE |
TAB, SOLDER LUG |
| AXGY |
MOUNTING METHOD |
THREADED BUSHING SINGLE MOUNTING FACILITY |
| CSLC |
SWITCH ACTUATOR POSITIONING INCREMENT |
30.0 DEGREES SINGLE ACTUATOR |
| CTHF |
CONTACT LOAD CURRENT RATING |
150.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL 2.0 AMPERES RESISTIVE LOAD DC AT SEA LEVEL |
| AFDC |
NONTURN DEVICE TYPE |
TAB AT 9:00 O'CLOCK |
| CQTH |
ROTOR THROUGH CONNECTION QUANTITY |
2 EACH SECTION |
| AAJD |
THREAD CLASS |
2A SINGLE MOUNTING FACILITY |
| THSD |
THREAD SERIES DESIGNATOR |
UNEF SINGLE MOUNTING FACILITY |
| CQMK |
CONTACT VOLTAGE RATING IN VOLTS |
110.0 AC AT SEA LEVEL 15.0 DC AT SEA LEVEL |
| CRJH |
SWITCH ACTUATOR INDEXING POSITION QUANTITY |
6 SINGLE ACTUATOR |
| ABWV |
SHAFT DIAMETER |
0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM SINGLE ACTUATOR |
| STYL |
STYLE DESIGNATOR |
CIRCULAR WAFER, BUSHING MOUNT |
