| MRC |
Requirement Statement |
Characteristics |
| CTHF |
CONTACT LOAD CURRENT RATING |
1.0 AMPERES RESISTIVE LOAD AC AT SEA LEVEL 2.0 AMPERES RESISTIVE LOAD DC AT SEA LEVEL |
| ABHP |
OVERALL LENGTH |
5.545 INCHES MINIMUM AND 5.600 INCHES MAXIMUM |
| CSMW |
III DETENT ROTATIONAL TORQUE RANGE |
22.000 TO 42.000 INCH-OUNCES SINGLE ACTUATOR |
| CRJH |
SWITCH ACTUATOR INDEXING POSITION QUANTITY |
4 SINGLE ACTUATOR |
| CSHW |
CONTACT SWITCHING ACTION |
MAKES BEFORE BREAKS EACH SECTION FRONT MAKES BEFORE BREAKS EACH SECTION REAR |
| ABXF |
SHAFT LENGTH |
0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM SINGLE ACTUATOR |
| AEFP |
NONTURN DEVICE RADIUS |
0.375 INCHES NOMINAL AT 9:00 O'CLOCK |
| ABNB |
FIRST FLAT LENGTH |
0.185 INCHES MINIMUM AND 0.215 INCHES MAXIMUM SINGLE ACTUATOR |
| CQMK |
CONTACT VOLTAGE RATING IN VOLTS |
110.0 AC AT SEA LEVEL 28.0 DC AT SEA LEVEL |
| CQJX |
NOMINAL THREAD SIZE |
0.375 INCHES SINGLE MOUNTING FACILITY |
| ABMK |
OVERALL WIDTH |
0.937 INCHES NOMINAL |
| ABWV |
SHAFT DIAMETER |
0.247 INCHES MINIMUM AND 0.250 INCHES MAXIMUM SINGLE ACTUATOR |
| PMLC |
III PRECIOUS MATERIAL AND LOCATION |
CLIPS AND ROTOR BLADES SILVER |
| CQRQ |
III SHAFT FLAT/SLOT ANGULAR LOCATION |
270.0 DEGREES FROM NONTURN DEVICE SINGLE ACTUATOR |
| CTDN |
SWITCH ACTUATOR STOP DEVICE TYPE |
FIXED STOP SINGLE ACTUATOR |
| CSCF |
TERMINAL TYPE |
TAB, SOLDER LUG |
| AXGY |
MOUNTING METHOD |
THREADED BUSHING SINGLE MOUNTING FACILITY |
| PRMT |
III PRECIOUS MATERIAL |
SILVER |
| CSLC |
SWITCH ACTUATOR POSITIONING INCREMENT |
30.0 DEGREES SINGLE ACTUATOR |
| AASA |
THREAD LENGTH |
0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM SINGLE MOUNTING FACILITY |
| AFBH |
INDIVIDUAL SECTION QUANTITY |
6 |
| CRSJ |
SHAFT TYPE |
ROUND, NONPARALLEL FLATTED SINGLE ACTUATOR |
| AFDC |
NONTURN DEVICE TYPE |
TAB AT 9:00 O'CLOCK |
| ABKW |
OVERALL HEIGHT |
1.000 INCHES NOMINAL |
| AAJD |
THREAD CLASS |
2A SINGLE MOUNTING FACILITY |
| AJZE |
SWITCH CONTACT BASIC DESIGN |
NONPILE-UP NONSYMMETRICAL |
| THSD |
THREAD SERIES DESIGNATOR |
UNEF SINGLE MOUNTING FACILITY |
| STYL |
STYLE DESIGNATOR |
CIRCULAR WAFER, BUSHING MOUNT |
