| MRC |
Requirement Statement |
Characteristics |
| HEAT |
HEAT TREATMENT |
ANNEALED OVERALL |
| CQBC |
MINIMUM TENSILE STRENGTH |
180000 POUNDS PER SQUARE INCH |
| AASU |
HEAD HEIGHT |
0.180 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
| AAZE |
SHANK DIAMETER |
0.373 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| ABAF |
EXPANSION DEVICE |
SERRATED STEM-TYPE W |
| SFTT |
SURFACE TREATMENT |
CADMIUM AND CHROMATE BOLT CADMIUM AND CHROMATE NUT CADMIUM AND PASSIVATE SLEEVE |
| AASK |
HEAD STYLE |
HEXAGON |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE BOLT QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE NUT QQ-P-416,TY 1,CL 3 FED SPEC 1ST TREATMENT RESPONSE AND QQ-P-35 FED SPEC 2ND TREATMENT RESPONSE SLEEVE |
| CQSX |
SHEAR STRENGTH |
19500 DOUBLE POUNDS PER SQUARE INCH |
| MATT |
MATERIAL |
STEEL COMP 4130 OR STEEL COMP 8740 OR STEEL COMP 4140 BODY STEEL COMP 303F SLEEVE STEEL COMP 4130 OR STEEL COMP 8740 OR STEEL COMP 4140 STEM |
| FEAT |
SPECIAL FEATURES |
HEAT PROCESS MIL-H-6875 |
| ANEE |
GRIP LENGTH |
0.656 INCHES MINIMUM AND 0.719 INCHES MAXIMUM |
| ASDB |
WIDTH ACROSS FLATS |
0.491 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| AASB |
FASTENER LENGTH |
0.902 INCHES MINIMUM AND 0.932 INCHES MAXIMUM |
| AAZF |
SHANK STYLE |
THREADED SELF-PLUGGING SHANK W/SLEEVE |
| ABAJ |
LUBRICATION |
DRY FILM OR WAX |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 3RD MATERIAL RESPONSE BODY AMS 5641 ASSN STD SINGLE MATERIAL RESPONSE SLEEVE MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 3RD MATERIAL RESPONSE STEM |
