| MRC |
Requirement Statement |
Characteristics |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 1ST END 37.0 DEGREES 2ND END |
| CRSM |
VACUUM IN TORR |
50.8 |
| FEAT |
SPECIAL FEATURES |
DESIGN ANALYSIS; NUCLEAR HARDNESS CRITICAL |
| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AARX |
INSIDE DIAMETER |
0.406 INCHES NOMINAL |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END THREADED INTERNAL TUBE 2ND END |
| CRZY |
(NON-CORE DATA) SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| AAJD |
THREAD CLASS |
3B 1ST END 3B 2ND END |
| CRFY |
FLOW ANGLE |
84.0 DEGREES 1ST END |
| CQHW |
(NON-CORE DATA) FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
SOCKET CADMIUM |
| CQGH |
(NON-CORE DATA) FIRST END FITTING/COMPONENT AND MATERIAL |
NIPPLE ALUMINUM ALLOY NIPPLE ALUMINUM ALLOY NUT ALUMINUM ALLOY SOCKET STEEL |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
ABRASION RESISTANT AND ACID RESISTANT AND CORROSION RESISTANT AND FUEL RESISTANT AND OIL RESISTANT |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 1ST END SWIVEL NUT FLARE 2ND END |
| AKUU |
END CONNECTION DESIGN |
ELBOW 1ST END STRAIGHT 2ND END |
| CRTL |
CRITICALITY CODE JUSTIFICATION |
FEAT |
| CRLL |
(NON-CORE DATA) SECOND END FITTING/COMPONENT AND SURFACE TREATMENT |
SOCKET CADMIUM |
| ADJM |
(NON-CORE DATA) INNER CONVEYING TUBE MATERIAL |
PLASTIC, POLYTETRAFLUOROETHYLENE |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| CRBL |
(NON-CORE DATA) SECOND END FITTING/COMPONENT AND MATERIAL |
NIPPLE ALUMINUM ALLOY NUT ALUMINUM ALLOY SOCKET STEEL |
| CQBG |
(NON-CORE DATA) FIRST END SWIVEL ACTION CAPABILITY |
INCLUDED |
| CRXX |
MEASURING METHOD AND LENGTH |
35.500 INCHES NOMINAL WORKING |
| ABJH |
TEMP RATING |
-100.0 DEG FAHRENHEIT AND 500.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ABKV |
OUTSIDE DIAMETER |
0.562 INCHES NOMINAL |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF 1ST END UNJF 2ND END |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END RIGHT-HAND 2ND END |
| CQBD |
BURST TEST PRESSURE |
8000.0 POUNDS PER SQUARE INCH |
| CRDW |
HYDROSTATIC TEST PRESSURE |
3000.0 POUNDS PER SQUARE INCH |
| CQBB |
(NON-CORE DATA) SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| CQGM |
MAXIMUM OPERATING PRESSURE |
1500.0 POUNDS PER SQUARE INCH |
| MEDA |
MEDIA FOR WHICH DESIGNED |
NITROGEN, GASEOUS SINGLE RESPONSE |
| CQJX |
NOMINAL THREAD SIZE |
0.875 INCHES 1ST END 0.750 INCHES 2ND END |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
4.625 INCHES |
