| MRC |
Requirement Statement |
Characteristics |
| AEBY |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH |
4.970 INCHES MINIMUM AND 5.030 INCHES MAXIMUM |
| ADAT |
BODY WIDTH |
7.190 INCHES MINIMUM AND 7.310 INCHES MAXIMUM |
| ABHP |
OVERALL LENGTH |
5.438 INCHES MINIMUM AND 5.562 INCHES MAXIMUM |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
6 UNTHREADED HOLE |
| AHAS |
LOAD IMPEDANCE PER FUNCTION |
50.0 OHMS 1ST RADIO INTERFERENCE 1ST FUNCTION 50.0 OHMS 2ND RADIO INTERFERENCE 2ND FUNCTION 50.0 OHMS 3RD RADIO INTERFERENCE 3RD FUNCTION |
| ADAU |
BODY HEIGHT |
2.469 INCHES MINIMUM AND 2.531 INCHES MAXIMUM |
| AHAQ |
SOURCE IMPEDANCE RATING PER FUNCTION |
50.0 OHMS 1ST RADIO INTERFERENCE 1ST FUNCTION 50.0 OHMS 2ND RADIO INTERFERENCE 2ND FUNCTION 50.0 OHMS 3RD RADIO INTERFERENCE 3RD FUNCTION |
| AHBC |
OPERATING CURRENT RATING PER FUNCTION IN AMPS |
7.0 1ST RADIO INTERFERENCE 1ST FUNCTION 7.0 2ND RADIO INTERFERENCE 2ND FUNCTION 7.0 3RD RADIO INTERFERENCE 3RD FUNCTION |
| STYL |
STYLE DESIGNATOR |
RECTANGULAR TERMINAL/TERMINALS ON OPPOSITE SURFACES |
| AFGA |
III OPERATING TEMP RANGE |
-40.0 TO 71.0 DEG CELSIUS |
| AHBB |
POWER LINE FREQUENCY RATING PER FUNCTION IN HERTZ |
400.0 1ST RADIO INTERFERENCE 1ST FUNCTION 400.0 2ND RADIO INTERFERENCE 2ND FUNCTION 400.0 3RD RADIO INTERFERENCE 3RD FUNCTION |
| CQGC |
OPERATING VOLTAGE RATING AND TYPE PER FUNCTION |
220.0 VOLTS AC 1ST RADIO INTERFERENCE 1ST FUNCTION 220.0 VOLTS AC 2ND RADIO INTERFERENCE 2ND FUNCTION 220.0 VOLTS AC 3RD RADIO INTERFERENCE 3RD FUNCTION |
| CQDW |
FUNCTIONAL TERMINAL TYPE AND QUANTITY |
3 TAB, SOLDER LUG INPUT 1ST FUNCTION 3 TAB, SOLDER LUG OUTPUT 2ND FUNCTION |
| ADAQ |
BODY LENGTH |
4.312 INCHES MINIMUM AND 4.438 INCHES MAXIMUM |
| AHBL |
III PRINCIPAL CIRCUITRY TYPE PER FUNCTION |
INDUCTANCE-CAPACITANCE 1ST RADIO INTERFERENCE 1ST FUNCTION INDUCTANCE-CAPACITANCE 2ND RADIO INTERFERENCE 2ND FUNCTION INDUCTANCE-CAPACITANCE 3RD RADIO INTERFERENCE 3RD FUNCTION |
| AKNA |
INCLOSURE TYPE |
HERMETICALLY SEALED |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.203 INCHES NOMINAL |
