| MRC |
Requirement Statement |
Characteristics |
| CQJX |
NOMINAL THREAD SIZE |
0.438 INCHES 1ST END 0.125 INCHES 2ND END |
| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| CRXX |
MEASURING METHOD AND LENGTH |
6.625 INCHES NOMINAL OVERALL |
| CQGM |
MAXIMUM OPERATING PRESSURE |
400.0 POUNDS PER SQUARE INCH |
| THSD |
THREAD SERIES DESIGNATOR |
UNF 1ST END NPTF 2ND END |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END THREADED EXTERNAL PIPE 2ND END |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
2.500 INCHES |
| CRZY |
(NON-CORE DATA) SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 1ST END PLAIN 2ND END |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
ABRASION RESISTANT AND GREASE RESISTANT AND LIGHT RESISTANT AND OIL RESISTANT AND OZONE RESISTANT |
| CQRB |
SEAT ANGLE |
45.0 DEGREES 1ST END |
| CRDW |
HYDROSTATIC TEST PRESSURE |
800.0 POUNDS PER SQUARE INCH |
| AARX |
INSIDE DIAMETER |
0.250 INCHES NOMINAL |
| ABKV |
OUTSIDE DIAMETER |
0.500 INCHES NOMINAL |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END STRAIGHT 2ND END |
| AAJD |
THREAD CLASS |
2B 1ST END |
| ABJH |
TEMP RATING |
-40.0 DEG FAHRENHEIT AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END RIGHT-HAND 2ND END |
| CQBG |
(NON-CORE DATA) FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| ADJM |
(NON-CORE DATA) INNER CONVEYING TUBE MATERIAL |
RUBBER, BUNA-N |
| CQBB |
(NON-CORE DATA) SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED FIBER OUTER LAYER MOLDED RUBBER, CHLOROPRENE |
| CRBL |
(NON-CORE DATA) SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING BRASS |
| CQGH |
(NON-CORE DATA) FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING BRASS |
| CQBD |
BURST TEST PRESSURE |
1600.0 POUNDS PER SQUARE INCH |
