| MRC |
Requirement Statement |
Characteristics |
| CQDW |
FUNCTIONAL TERMINAL TYPE AND QUANTITY |
1 PIN INPUT 1ST FUNCTION 1 PIN OUTPUT 2ND FUNCTION 2 PIN GROUND 3RD FUNCTION |
| PKWT |
III UNPACKAGED UNIT WEIGHT |
1.300 POUNDS |
| CRBC |
III DISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS |
20.0 MINIMUM BLANK AND 6.0 MAXIMUM BLANK AND 6.0 MAXIMUM BLANK AND 20.0 MINIMUM BLANK |
| AEHA |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH |
1.562 INCHES NOMINAL |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.160 INCHES NOMINAL |
| CRBB |
FREQUENCY BAND WIDTH PER FUNCTION |
73.00 KILOHERTZ BLANK AND 75.00 KILOHERTZ BLANK |
| AHAU |
INPUT IMPEDANCE PER FUNCTION W/LOAD |
600.0 OHMS BLANK |
| CQRG |
III BODY MATERIAL |
METAL |
| STYL |
STYLE DESIGNATOR |
RECTANGULAR TERMINAL/TERMINALS ON ONE SURFACE |
| AFSV |
III AVERAGE LIFE RATING IN HOURS |
10000.0 |
| ADAT |
BODY WIDTH |
1.250 INCHES NOMINAL |
| ABKW |
OVERALL HEIGHT |
3.360 INCHES NOMINAL |
| AHAV |
OUTPUT IMPEDANCE PER FUNCTION W/SOURCE ACROSS INPUT |
2.0 KILOHMS BLANK |
| ADAQ |
BODY LENGTH |
4.500 INCHES NOMINAL |
| CQFC |
III SPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION |
72.00 KILOHERTZ BLANK AND 73.00 KILOHERTZ BLANK AND 75.00 KILOHERTZ BLANK AND 76.00 KILOHERTZ BLANK |
| FEAT |
SPECIAL FEATURES |
CARRIER FREQUENCY 72.0 KHZ UPPER SIDEBAND |
| SR-1 |
MANUFACTURERS CODE |
00724 |
| SR-1 |
MFR SOURCE CONTROLLING REFERENCE |
08-00242-004 |
| AKNA |
INCLOSURE TYPE |
HERMETICALLY SEALED |
| CQDR |
INSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS |
8.0 BLANK |
| AEBY |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH |
3.750 INCHES NOMINAL |
| ADAU |
BODY HEIGHT |
3.000 INCHES NOMINAL |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
2 UNTHREADED HOLE |
| AFGA |
III OPERATING TEMP RANGE |
-55.0 TO 75.0 DEG CELSIUS |
| AHAJ |
REFERENCE FREQUENCY PER FUNCTION |
74.0 KILOHERTZ BLANK |
| TEST |
TEST DATA DOCUMENT |
00724-08-00242-004 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
