| MRC |
Requirement Statement |
Characteristics |
| CTGR |
ADJUSTMENT DEVICE DRIVE TYPE AND QUANTITY |
1 SLOTTED SCREW |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
2 TERMINAL |
| ABPM |
BODY DIAMETER |
0.218 INCHES NOMINAL |
| TEST |
TEST DATA DOCUMENT |
13499-917-1260-080 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| AXGT |
III INSULATION DC RESISTANCE AT 25 DEG CELSIUS |
10000.0 MEGOHMS |
| ADAU |
BODY HEIGHT |
0.280 INCHES NOMINAL |
| AXGR |
ADJUSTMENT DEVICE TORQUE |
0.500 INCH-OUNCES MINIMUM AND 3.000 INCH-OUNCES MAXIMUM |
| AEBS |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO DIAMETER |
0.195 INCHES NOMINAL |
| CTGP |
NONDERATED VOLTAGE RATING AND TYPE |
100.0 DC CONTINUOUS SINGLE SECTION |
| CTGS |
III CAPACITANCE DRIFT IN PICOFARADS |
0.50 SINGLE SECTION |
| AECJ |
III QUALITY FACTOR AT 25 DEG CELSIUS |
500.0 |
| TTQY |
TERMINAL TYPE AND QUANTITY |
2 TAB, SOLDER LUG |
| AKNA |
INCLOSURE TYPE |
ENCAPSULATED |
| CQJJ |
NONDERATED OPERATING TEMP |
-55.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM |
| CTGN |
CAPACITANCE RANGE IN PICOFARADS |
2.0 TO 5.0 SINGLE SECTION |
| CTGQ |
CAPACITANCE CHANGE IN PERCENT AT OPERATING TEMP FROM 25 DEG CELSIUS |
-4.50 TO 2.00 MINIMUM AND -4.20 TO 3.40 MAXIMUM SINGLE SECTION |
| AEBC |
TEMP COEFFICIENT OF CAPACITANCE IN PPM PER DEG CELSIUS |
0.0 SINGLE SECTION |
| AAQL |
BODY STYLE |
ROTARY |
