| MRC |
Requirement Statement |
Characteristics |
| AKPX |
POLE QUANTITY |
2 SINGLE SECTION FRONT |
| AATB |
WIDTH BETWEEN FLATS |
0.186 INCHES MINIMUM AND 0.188 INCHES MAXIMUM SINGLE ACTUATOR |
| CQMK |
CONTACT VOLTAGE RATING IN VOLTS |
125.0 HIGHEST AC VOLTAGE RATING AT SEA LEVEL 6.0 LOWEST AC VOLTAGE RATING AT SEA LEVEL |
| CRSJ |
SHAFT TYPE |
ROUND, PARALLEL FLATTED, THREADED HOLE SINGLE ACTUATOR |
| ABKW |
OVERALL HEIGHT |
1.546 INCHES MINIMUM AND 1.578 INCHES MAXIMUM |
| CRJH |
SWITCH ACTUATOR INDEXING POSITION QUANTITY |
12 SINGLE ACTUATOR |
| CTHF |
CONTACT LOAD CURRENT RATING |
500.0 MILLIAMPERES RESISTIVE LOAD AND 3.5 AMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| AFBH |
INDIVIDUAL SECTION QUANTITY |
1 |
| AJZE |
SWITCH CONTACT BASIC DESIGN |
NONPILE-UP SYMMETRICAL |
| CQRQ |
III SHAFT FLAT/SLOT ANGULAR LOCATION |
90.0 DEGREES FROM NONTURN DEVICE SINGLE ACTUATOR |
| AFDC |
NONTURN DEVICE TYPE |
TAB AT 3:00 O'CLOCK |
| CQJX |
NOMINAL THREAD SIZE |
0.375 INCHES SINGLE MOUNTING FACILITY |
| AASA |
THREAD LENGTH |
0.313 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| AFGA |
III OPERATING TEMP RANGE |
-40.0 TO 65.0 DEG CELSIUS |
| CSHW |
CONTACT SWITCHING ACTION |
BREAKS BEFORE MAKES SINGLE SECTION FRONT |
| ABWV |
SHAFT DIAMETER |
0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM SINGLE ACTUATOR |
| CTDN |
SWITCH ACTUATOR STOP DEVICE TYPE |
FIXED STOP SINGLE ACTUATOR |
| AKPY |
THROW QUANTITY |
3 SINGLE SECTION FRONT |
| CSCF |
TERMINAL TYPE |
TAB, SOLDER LUG |
| ABHP |
OVERALL LENGTH |
1.500 INCHES NOMINAL |
| AXGY |
MOUNTING METHOD |
THREADED BUSHING SINGLE MOUNTING FACILITY |
| ABMK |
OVERALL WIDTH |
1.234 INCHES MINIMUM AND 1.266 INCHES MAXIMUM |
| CSLC |
SWITCH ACTUATOR POSITIONING INCREMENT |
30.0 DEGREES SINGLE ACTUATOR |
| AEFP |
NONTURN DEVICE RADIUS |
0.515 INCHES MINIMUM AND 0.547 INCHES MAXIMUM AT 3:00 O'CLOCK |
| CSMW |
III DETENT ROTATIONAL TORQUE RANGE |
15.000 TO 25.000 INCH-OUNCES SINGLE ACTUATOR |
| ABXF |
SHAFT LENGTH |
0.672 INCHES MINIMUM AND 0.704 INCHES MAXIMUM SINGLE ACTUATOR |
| AAJD |
THREAD CLASS |
2A SINGLE MOUNTING FACILITY |
| THSD |
THREAD SERIES DESIGNATOR |
UNEF SINGLE MOUNTING FACILITY |
| STYL |
STYLE DESIGNATOR |
CIRCULAR WAFER, BUSHING MOUNT |
| ABNB |
FIRST FLAT LENGTH |
0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM SINGLE ACTUATOR |
