| Mfg. Part # | Mfg. Name | CAGE | RNCC | RNVC | ISC | MSDS | SADC | DAC | HCC |
|---|---|---|---|---|---|---|---|---|---|
| 004-003005-070 | NORTHROP GRUMMAN SYSTEMS CORPORATION | 26916 | 5 | 1 | 5 | ||||
| 10422 | KLEINSCHMIDT INC | 82423 | 5 | 9 | 5 | ||||
| 115314 | GENERAL MOTORS CORP | 24617 | 5 | 1 | 5 | ||||
| 115314 | DAIMLER CHRYSLER | 12204 | 5 | 1 | 5 | ||||
| 115314 | ARMY WEAPONS COMMAND | 21450 | 5 | 1 | 5 | ||||
| 115314 | NAVISTAR INTL CORP | 31007 | 5 | 9 | 5 | ||||
| 115314 | KOMATSU AMERICAN INTL CO | 29510 | 5 | 9 | 5 | ||||
| 115314 | NAVISTAR INTL CORP | 89346 | 5 | 1 | 5 | ||||
| 34808S2 | FORD MOTOR CO | 23040 | 5 | 9 | 5 | ||||
| 34808S2 | FORD MOTOR CO | 57526 | 5 | 1 | 5 | ||||
| 7-16 R | KOMATSU AMERICAN INTL CO | 29510 | 5 | 9 | 5 | ||||
| 7-16 R | KOMATSU AMERICA CORP. | 0SAT8 | C | 1 | 5 | C | |||
| 91X9R | PRESSED METALS OF AMERICA INC | 83120 | 5 | 9 | 5 | ||||
| A20472 | MANROY ENGINEERING LTD | U4574 | 5 | 2 | 5 | ||||
| FFW84CLASSASTYLE2 | FEDERAL SPECIFICATIONS | 81348 | 4 | 1 | 5 | ||||
| MS35338-66 | MILITARY STANDARDS | 96906 | 5 | 9 | 5 | ||||
| MS35338-66 | NATIONAL AEROSPACE STANDARDS | 80205 | 3 | 2 | 5 | ||||
| SW25212 | DRS SUSTAINMENT SYSTEMS INC. | 98255 | 5 | 1 | 5 |
| MRC | Requirement Statement | Characteristics |
|---|---|---|
| STYL | STYLE DESIGNATOR | SPLIT HELICAL-RIGHT HAND |
| SFTT | SURFACE TREATMENT | PHOSPHATE OVERALL |
| SR-1 | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | FFW84CLASSASTYLE2 |
| ABPX | MATERIAL THICKNESS | 0.109 INCHES MINIMUM AND 0.119 INCHES MAXIMUM |
| SR-1 | SPEC/STD CONTROLLING DATA | |
| MATT | MATERIAL | STEEL COMP 1060 OR STEEL COMP 1070 OR STEEL COMP 1078 OR STEEL COMP 1080 OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-P-16232,TY Z MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| ABKV | OUTSIDE DIAMETER | 0.779 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES OVERALL |
| SR-1 | MANUFACTURERS CODE | 81348 |
| AAUB | HOLE DIAMETER | 0.446 INCHES MINIMUM AND 0.459 INCHES MAXIMUM |
| CQFM | HARDNESS RATING | 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM |
