| MRC |
Requirement Statement |
Characteristics |
| SFTT |
SURFACE TREATMENT |
CADMIUM OR PASSIVATE OVERALL |
| CQJX |
NOMINAL THREAD SIZE |
0.812 INCHES |
| FEAT |
SPECIAL FEATURES |
MAX SURFACE FINISH,ALL SURFACES 125 MICROINCH AA,COUNTERSINK ID T0 0.812 IN. DIA ON EACH SIDE |
| AZKQ |
TEMP RATING |
NOT RATED |
| ALET |
HOLE TYPE AND QUANTITY |
6 DRILLED |
| ADEA |
NUT HEIGHT |
0.340 INCHES MINIMUM AND 0.360 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
20 |
| CRSQ |
COUNTERSINK ANGLE |
109.5 DEGREES MINIMUM AND 110.5 DEGREES MAXIMUM FIRST END 109.5 DEGREES MINIMUM AND 110.5 DEGREES MAXIMUM SECOND END |
| MATT |
MATERIAL |
STEEL OVERALL |
| SR-5 |
THE MANUFACTURERS DATA |
|
| SR-5 |
DESIGN CONTROL REFERENCE |
204-010-767-1 |
| CQFM |
HARDNESS RATING |
NOT RATED |
| CRHC |
HOLE CONFIGURATION STYLE |
CONFIGURATION A |
| AAJD |
THREAD CLASS |
3B |
| ACTA |
NUT STYLE |
HEXAGON |
| CRTM |
BEARING SURFACE TYPE |
ANY ACCEPTABLE |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-763,CLASS 416,COND 4 FED SPEC SINGLE MATERIAL RESPONSE OR MIL-S-6758,COMP 4130,COND D4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| BZRR |
THREAD SERIES |
UNEF |
| ASDB |
WIDTH ACROSS FLATS |
0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM |
| SR-5 |
MANUFACTURERS CODE |
97499 |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE 1,CLASS 1 FED SPEC SINGLE TREATMENT RESPONSE OR BPS FW4007,FSCM 97499 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| AGGP |
DRILLED HOLE DIAMETER |
0.080 INCHES NOMINAL |
