| MRC |
Requirement Statement |
Characteristics |
| ABHP |
OVERALL LENGTH |
2.031 INCHES NOMINAL |
| ABWV |
SHAFT DIAMETER |
0.250 INCHES NOMINAL SINGLE ACTUATOR |
| AKPX |
POLE QUANTITY |
6 EACH SECTION REAR |
| AEFP |
NONTURN DEVICE RADIUS |
0.531 INCHES NOMINAL AT 9:00 O'CLOCK |
| ABNC |
FLAT HEIGHT |
0.216 INCHES NOMINAL SINGLE ACTUATOR |
| AKPY |
THROW QUANTITY |
2 EACH SECTION REAR |
| CRSJ |
SHAFT TYPE |
ROUND, FLATTED SINGLE ACTUATOR |
| AJZE |
SWITCH CONTACT BASIC DESIGN |
NONPILE-UP SYMMETRICAL |
| CSMW |
III DETENT ROTATIONAL TORQUE RANGE |
1.000 TO 8.000 INCH-POUNDS SINGLE ACTUATOR |
| CQJX |
NOMINAL THREAD SIZE |
0.375 INCHES SINGLE MOUNTING FACILITY |
| ABMK |
OVERALL WIDTH |
1.297 INCHES MAXIMUM |
| CSHW |
CONTACT SWITCHING ACTION |
BREAKS BEFORE MAKES EACH SECTION REAR |
| AFBH |
INDIVIDUAL SECTION QUANTITY |
2 |
| ABKW |
OVERALL HEIGHT |
1.375 INCHES MAXIMUM |
| ABNB |
FIRST FLAT LENGTH |
0.312 INCHES NOMINAL SINGLE ACTUATOR |
| CTDN |
SWITCH ACTUATOR STOP DEVICE TYPE |
FIXED STOP SINGLE ACTUATOR |
| CTHF |
CONTACT LOAD CURRENT RATING |
50.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL 500.0 MILLIAMPERES RESISTIVE LOAD AND 50.0 MILLIAMPERES INDUCTIVE LOAD DC AT SEA LEVEL |
| CQRQ |
III SHAFT FLAT/SLOT ANGULAR LOCATION |
165.0 DEGREES FROM NONTURN DEVICE SINGLE ACTUATOR |
| CRJH |
SWITCH ACTUATOR INDEXING POSITION QUANTITY |
2 SINGLE ACTUATOR |
| ABXF |
SHAFT LENGTH |
0.406 INCHES NOMINAL SINGLE ACTUATOR |
| AASA |
THREAD LENGTH |
0.375 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| CSCF |
TERMINAL TYPE |
TAB, SOLDER LUG |
| CQMK |
CONTACT VOLTAGE RATING IN VOLTS |
300.0 AC AT SEA LEVEL 30.0 DC AT SEA LEVEL |
| AXGY |
MOUNTING METHOD |
THREADED BUSHING SINGLE MOUNTING FACILITY |
| PRMT |
III PRECIOUS MATERIAL |
SILVER |
| AFGA |
III OPERATING TEMP RANGE |
-65.0 TO 125.0 DEG CELSIUS |
| CSLC |
SWITCH ACTUATOR POSITIONING INCREMENT |
30.0 DEGREES SINGLE ACTUATOR |
| PMLC |
III PRECIOUS MATERIAL AND LOCATION |
CONTACTS AND ROTOR BLADES SILVER |
| AFDC |
NONTURN DEVICE TYPE |
TAB AT 9:00 O'CLOCK |
| AAJD |
THREAD CLASS |
2A SINGLE MOUNTING FACILITY |
| THSD |
THREAD SERIES DESIGNATOR |
UNEF SINGLE MOUNTING FACILITY |
| STYL |
STYLE DESIGNATOR |
CIRCULAR WAFER, BUSHING MOUNT |
